GW INSTEK PART NO. ISO-9001 CERTIFIED MANUFACTURER. AFETY INSTRUCTIONS. This section contains the basic safety symbols that may. Appear on the accompanying user manual CD or on the. For detailed safety instructions. Precautions, please see the Safety Instructions chapter. In the user manual CD. Safety Symbols. Attention: Refer to the Manual Protective Conductor Terminal Earth (Ground) Terminal GDS-1000A Series User Manual 8 Safety Guidelines General Guideline CAUTION Make sure the BNC input voltage does not exceed 300V peak. Never connect a hazardous live voltage to the ground side of the BNC connectors. It might lead to fire and electric shock. Explore our options for a Instek GDS-1052-U Digital Storage Oscilloscope. With various sizes and selections, you are sure to find the perfect solution at TestEquity.
INTERFACE OVERVIEW
5
Configuring the USB Interface
USB connection PC end
Type A, host
GDS-1000-U end
Type B, slave
Speed
1.1/2.0 (full speed)
Procedure
Gw Instek Gos 6112
1. Connect the USB cable to
the USB slave port on the
GDS-1000-U.
2. When the PC asks for the USB driver, select
dso_cdc_1000.inf which is downloadable from
the GW website, GDS-
1000-U product corner.
3. On the PC, activate a terminal application such
as MTTTY (Multi-Threaded TTY). To check the
COM port No., see the Device Manager in the
PC. For WindowsXP, select Control panel →
System → Hardware tab.
4. Run this query command via the terminal
application.
*idn?
This command should return the manufacturer,
model number, serial number, and firmware
version in the following format.
GW, GDS-1052-U, 000000001, V1.00
5. Configuring the command interface is
completed. Refer to the programming manual
for the remote commands and other details.