You can view the full version and download it in PDF format.
13 - 1/2) ATX12V/ATX (2x4 12V Power Connector and 2x12 Main Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. GA-78LMT-USB3 R2 GA-78LMT-USB3 R2 (rev. 1.0) Key Features Specification Support Gallery Buy Back to List page AMD 760G + SB710 Chipset Compare. Supports AMD AM3+ FX / AM3 Phenom™ II, Athlon™ II series Processors. Hybrid EFI technology with GIGABYTE DualBIOS™.
Page 35 of 44
- 35 -
Supported on Windows 7/Vista operating system only.
ACPI Suspend Type
Specifies the ACPI sleep state when the system enters suspend.
S1(POS)
Enables the system to enter the ACPI S1 (Power on Suspend) sleep state. In S1 sleep
state, the system appears suspended and stays in a low power mode. The system can
±
Enables the system to enter the ACPI S3 (Suspend to RAM) sleep state (default). In
S3 sleep state, the system appears to be off and consumes less power than in the S1
state. When signaled by a wake-up device or event, the system resumes to its working
&
Configures the way to turn off the computer in MS-DOS mode using the power button.
Instant-Off
Press the power button and then the system will be turned off instantly. (Default)
Delay 4 Sec
Press and hold the power button for 4 seconds to turn off the system. If the power
button is pressed for less than 4 seconds, the system will enter suspend mode.
USB Wake Up from S3
Allows the system to be awakened from ACPI S3 sleep state by a wake-up signal from the installed USB
&
Allows the system to be awakened from an ACPI sleep state by a wake-up signal from a modem that
&
Allows the system to be awakened from an ACPI sleep state by a wake-up signal from a PCI or PCIe
device. Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.
&
(Note)
Enables or disables High Precision Event Timer (HPET) for Windows 7/Vista operating system. (Default:
&
Allows the system to be turned on by a PS/2 mouse wake-up event.
Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.
Disabled
±
Double click on left button on the PS/2 mouse to turn on the system.
Power On By Keyboard
Allows the system to be turned on by a PS/2 keyboard wake-up event.
Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.
Disabled
±
Set a password with 1~5 characters to turn on the system.
Any KEY
Press any key on the keyboard to turn on the system.
Keyboard 98
Press POWER button on the Windows 98 keyboard to turn on the system.
KB Power ON Password
Power On by Keyboard
Password
a password with up to 5 characters and then press <Enter> to accept. To turn on the system, enter the
Ga-78lmt-usb3 Manual Portugues
Note: To cancel the password, press <Enter> on this item. When prompted for the password, press <Enter>
Ga 78lmt Usb3 Drivers
again without entering the password to clear the password settings.